Baccara Australia

ph | +61 3 9729 3250    e | sales@baccara.com.au

ph | +61 3 9729 3250    e | sales@baccara.com.au

Pressure Switches

We stock a huge amount of pressure switches with ranges from 0.24 bar up to 410 bar

Low Range Pressure Switches

With ranges varying between 0.04-10 bar. The majority of these switches have a maximum overpressure of 24 bar, however we do stock some heavy duty low range pressure switches for large spikes in system pressure.

Please note: Not every combination below is available. This is to be used as a guide to choose a suitable switch.

Please specify maximum system pressure when ordering

Examples:

PS-L7-2M-A-SP-2-4 (previously PELA-3-2M-A-SP)
Pressure Switch – 1-10 bar – 1/8” NPT Male – Normally Open – Spade Terminal – Brass Body – Nitrile Diaphragm

PS-L8-4G-C-HC-3-1 (previously PDA-4-4G-C-HC-3)
Pressure Switch – 1.75 to 10 bar – 1/4” BSP Male – Change Over – DIN Plug – Stainless Steel Body – NBR Diaphragm

Medium Range Pressure Switches

With ranges varying between 2-120 bar. The majority of these switches have a maximum overpressure of 620 bar, however we do stock some heavy duty medium range pressure switches for large spikes in system pressure.

Please note: Not every combination below is available. This is to be used as a guide to choose a suitable switch.

Please specify maximum system pressure when ordering

Examples:

PS-M2-4G-C-HC-1-4-G (previously PSAH-1-4G-C-HC)
Pressure Switch – 2 to 35 bar – 1/4” BSP Male – Change Over – DIN Plug – Steel Body – Nitrile Diaphragm – Gold Contacts

PS-M5-4G-B-SP-1-4 (previously PEHA-3-4G-B-SP)
Pressure Switch – 20 to 50 bar – 1/4” BSP Male – Normally Closed – Spade Terminal – Steel Body – Nitrile Diaphragm

 

High Range Pressure Switches

With ranges varying between 1-120 bar. The majority of these switches have a maximum overpressure of 24 bar, however we do stock some heavy duty low range pressure switches for large spikes in system pressure.

Please note: Not every combination below is available. This is to be used as a guide to choose a suitable switch.

Please specify maximum system pressure when ordering

Examples:

Examples:

PS-H2-4G-C-HC-1-4-S70R (previously PSAH-2-4G-C-HC)
Pressure Switch – 20 to 170 bar – 1/4” BSP Male – Change Over – DIN Plug – Steel Body – Nitrile Diaphragm- Set to 70 bar Rising

PS-H6-4G-A-SP-1-4 (previously PEHA-5-4G-A-SP)
Pressure Switch – 100-300 bar – 1/4” BSP Male – Normally Open – Spade Terminal – Steel Body – Nitrile Diaphragm